I’d seen the Bora Guide Plate in Woodcraft some time ago, but wondered how a piece of plastic would actually manage to hold a heavy saw. I really wasn’t able to find anything else that I was willing to try, and, so since it is no longer in Woodcraft, I ordered it on Amazon.
I’m pleased to be able to report that the use of the Bora Saw Plate Guide with my tracks went off with no major issues.
Review of the Bora Saw Plate Guide Workshop Addict
Review of the Bora clamp-edge guide on Concord Carpenter
I didn’t expect much for $29. But, it did what needed doing without allowing the saw to tear-out or wander. Decent cuts with a 60 tooth Freud blade. It’s useful to remember which side of you blade gives you the tear-outs, and I was able to make use of that memory for a few of the cross cuts. Rips would be no problem.
It isn’t going to replace a high-end track saw anytime soon, but with some finicky setup jiggling to get the saw squared up on the plate, it works well enough for infrequent use in breaking down plywood. Key is to keep the plywood well supported.
I did not find the saw track guide pointer (little bitty piece of plastic with “pointers”) to be of any use. I could not get my Sawcat to offset the base enough to allow positioning of the pointer in any of the three alternate screw holes.
The key also is to remember your track-to-cut-line offset. It’s gonna be some weird number based on the size of your saw plate and the way it gets fastened to the Bora Guide. I wound up using 1 11/32″. My setup rule has a 1/32″ scale, so I was good each time, but really wanted to land on 1 3/8″ or 1 1/2″ for the offset. Your results may vary.
I have the Bora 100″ guide track. I also have another manufacturer’s heavy duty 50″ guide track, and that is what I used for the cross-cuts using the Bora Saw Plate Guide. It worked fine, just as advertised! The Bora edge guides are excellent quality, and worth trying to find for your next time breaking down sheets of plywood. At this point, having built “cabinets” for the master bedroom closet, the shoe shelf, and now the lanai, it has been more than useful to have the clamp-on edge guides that work well. Bora has introduced other companion tool plates to use with their WRX tracks that would be worth investigating.
Of course, you could buy a True Track track saw system for $169.